Description
Titan Alloy Snow Tire Chains Diamond Pattern – Square Link to fit on your T1N 2001-2006 Sprinter 2500
Contact me – If you need assistance. I will confirm your tire size and fitment after you make your order, as well.
-
Titan Chain Tire Chains – Bigger Tires
- Tire Chains
- On Road Only
- Drape Over Tire – Make Connections
- Steel Square Link
- Deep Snow
- Assisted
- Class S Compatible
- No Rim Protection
- Titan Chain
-
These chains fit the following tire sizes:
- 225/75-16
- 235/60-18
- 235/65-17
- 235/70-16
- 235/75-15
- 235/75-16
- 235/80-16
- 245/70-16
- 255/60-16
- 255/65-16
- 255/70-15
- 275/60-15
- 30×9.5-15
These square-link, diamond-pattern tire chains provide excellent traction in snow and ice for vehicles with limited wheel well clearance. Made of a durable and corrosion-resistant manganese nickel alloy with built-in tensioners to ease installation.
Features:
- Sturdy, durable alloy tire chains give you extra traction in snow and ice
- Square links form cross chains
- Great traction in snow
- Excellent grip and stopping power on ice
- Small link size contributes to a smooth ride
- Diamond-pattern chains offer more tire coverage
- Increased traction and stopping power when driving forward and during turns
- Quick and simple manual installation with assisted adjustment
- Integrated tensioners let you control the fit of your chains
- Manganese nickel alloy construction is exceptionally strong, durable, and rust resistant
- SAEÂ Class S chains are designed for vehicles with restricted wheel well clearance
- Reusable plastic storage case included
Specs:
- Application: 15″ – 18″ tires (for exact sizes, see below)
- Link thickness: 0.145″ (3.7 mm)
- Maximum speed rating: 30 mph
- Quantity: 2 tire chains
- 30-Day limited warranty
Installation
1. Spread the chain around the back of the tire.
2. Connect the yellow and blue cable at the back of the tire.
3. Push the cable into place behind the tire and center the cross chains on the tire’s tread. Then, on the front side of the tire, join the 2 ends of the yellow side chain using the green hook.
4. Feed the silver draw chain with the rubber tensioner through the red channel at the bottom and pull it tight. Then run the tensioner through the red rings. (Note:Â Depending on your tire size, you might not be able to thread through both rings.) Pull the tensioner across the tire and fasten it to the yellow chain on the opposite side.
5. Pull your vehicle forward and retighten the chain.
Class “S” Designation
SAE Class “S” tire chains are designed for use on vehicles with restricted wheel well clearance. Certain newer cars, vans and small trucks, especially those with large, aftermarket tires, may require Class “S” chains.
These chains will fit your tires provided there is both:
- A – a minimum of 1.46″ (37 mm) between the top of the tire tread and the wheel well
- B – at least 0.59″ (15 mm) between the tire’s sidewall and the vehicle itself.
How to Choose Snow Chains for Your Vehicle
To choose the right snow chain, you must match your tire size. Those measurements can be found on the side of your tire, as shown below.
185/60-15
- (185) – indicates tire width in millimeters
- (60) – gives you the aspect ratio (sidewall height as percentage of width)
- (15) – denotes the diameter of the wheel rim in inches
2319 Titan Chain Diamond Alloy Snow Tire Chains – Square Links – Passenger Vehicles and Light Trucks – One Pair
