Description

T1N 2001-2006 Dodge Sprinter 2500 | 3500

SuperSprings Suspension Stabilizer and Sway Control Kit – OEM Leaf Springs Above Axle

1,650-lb Capacity. Install these helper leaf springs above your Dodge 2001-2006 Sprinter’s rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.

 

Features:

• Reinforce your T1N 2001-2006 Sprinter Van’s rear suspension with extra leaf springs that prevent sagging and reduce sway by up to 30 percent
  • Work like sway bars to stabilize your OEM springs and keep them from twisting
  • Compensate for windy conditions, wind turbulence from big rigs, and weight shifts while cornering
  • Lift your T1N 2001-2006 Sprinter Van when you are carrying a heavy load and prevent bottoming out
• Adjust automatically to your payload
  • Rollers on each end of the SuperSprings activate when the OEM springs flex under load
  • Rollers deactivate when OEM springs aren’t under load
• Customizable – the shackles attaching the SuperSprings provide several options for installation
  • Choose a setting that increases load support and ride height for constant heavy loads or to compensate for minor spring fatigue in an older automobile
  • Choose a setting that maintains the original factory ride conditions and minimizes effect on unloaded ride quality and height
  • Choose a medium setting that balances support, height and ride comfort
• Install easily – bolt on above your existing factory springs with no drilling required
  • Because factory springs set above the axle, an additional mounting kit is included for installation
• Require no maintenance – no tubing or air pressure to monitor or adjust like air springs
• Extend the life of brakes, tires, and factory suspension
• Made in the USA

 

Specs:

• Weight capacity: 1,650 lbs
  • SuperSprings will not increase your 2001-2006 Sprinter Van’s weight-carrying capacity
• U-bolt length: 4″
• Limited Lifetime warranty
• 30-Day satisfaction guarantee

These additional leaf springs add support and sway control to your existing OEM suspension. Just bolt on SuperSprings over your existing factory springs, and they automatically work when you need them. As the factory spring flexes, a roller at each end of the beefy helper spring reacts to engage the helper spring and to provide extra support. The springs help to better distribute cargo weight throughout your existing suspension, channeling that weight to the points on the frame that are designed to support heavy loads.

Placing these leaf springs above your factory springs helps to keep your OEM springs from twisting, so the SuperSprings act like a sway bar, reducing the body roll that makes driving more difficult and dangerous. With these helper springs, driving is safer and easier when it’s windy, when your vehicle is rocked by a passing semitruck and when cornering. The springs help to reduce sway by up to 30 percent. SuperSprings also allow more wheel travel in the rear suspension when they are under load, so they maintain traction and ride comfort better than rubber or polyurethane bumpers. That means they’re great for drivers who frequently tow.

You can also customize the level of support provided by SuperSprings. For most models, the shackles that attach the helper leaf springs to your existing leaf springs have several installation options:

• For greater support and ride height when your suspension is under a constant load or if you have an older automobile with some spring fatigue, install the helper springs using the upper bolt holes
• To maintain the factory ride and reduce the effect on your ride height, install using the lower bolt holes
• To balance support, height and ride comfort, install using the upper hole on one end and the lower hole on the other

 

SuperSprings are a maintenance-free, low-cost alternative to air spring systems, which require constant monitoring and air pressure adjustment. These helper leaf springs respond automatically to the load you carry, so there is no crawling under your truck to adjust them. You’ll also reduce wear and tear on your suspension, brakes and tires, which saves you money. The bolt-on installation means that they are easy to fit – no drilling required.

 

This T1N 2001-2006 Sprinter Vans suspension stabilizer kit is perfect for trucks towing fifth wheels, campers and gooseneck trailers.

An additional mounting kit is included for installation with factory springs that set above the axle.

 

For T1N 2001-2006 Sprinter Van’s with factory leaf springs that set above the axle, this mounting kit ensures that SuperSprings operate silently when the vehicle isn’t loaded. When factory springs set below the axle, the axle itself serves as a fulcrum for the helper leaf springs. However, for vehicles that have OEM springs that set above the axle, the 2-inch brackets in the mounting kit act as fulcrum points on the underside of the SuperSprings. Furthermore, the shackles at the ends of the helper springs hold them in place and pivot as the load is transferred to the SuperSprings. Because there is minimal preload tension in the installed SuperSprings, you get a quieter ride.